We have put together for you all the most common Hydrogen on Demand and hho generator parts in one convenient Hydrogen on Demand parts store. If you don't see the HHO generator parts you are looking for today, come back as we keep adding hho parts and complete Hydrogen on demand systems as we locate the best deals for you.
We are in the process of adding more "water fuel" - Hydrogen on demand and hho gas generator parts. When this hho fuel parts store is done all hho parts will have "International Shipping" prices --
Please Until then if ordering hho parts out of US Contact us for SHIPPING.
HHO Generator Fully Assembled 11 Plate HHO Dry Cell
Hydrogen Fuel Cell
|
The plates are 3.5" x 3.5" 18 gauge 316L stainless steel
The O Rings are 1/8" compressed to 1/16"
The O Rings are EPDM rubber heat resistant to 260 degrees
The Acrylic is 4"x4"x1/2 thick rated at 300 degrees
The 2 hose barbs are 1/4"
The attachment bracket angles are aluminum.
2 1/4-20 wing nuts for easy connection to the power source.
|
- All parts are highest quality available
- Save money on Fuel using Hydrogen on Demand
- Minimize Emissions
- Help save our Environment
- Help End Dependence on Foreign Oil
|
|
|
|
|
Use
this HHO Hydrogen Flow Meter to measure the output of HHO Gas from your
HHO Generator. No More guessing if your HHO Unit is functioning
properly with this flow meter from HHO2U HYDROGEN on DEMAND
|
- Measures Flow of HHO Gas Output
- Sturdy Construction
- Takes the guesswork out of your HHO Project!
- Optimize your HHO Project
|
|
|
|
|
HHO Dry Cell 21 Plate Fully Assembled - HHo Generator |
|
The plates are 3.5" x 3.5" 18 gauge 316L stainless steel
The O Rings are 1/8" compressed to 1/16"
The O Rings are EPDM rubber heat resistant to 260 degrees
The Acrylic is 4"x4"x1/2 thick rated at 300 degrees
The 2 hose barbs are 1/4"
The attachment bracket angles are aluminum.
2 1/4-20 wing nuts for easy connection to the power source.
|
- Saves Money on Gas
- Lowers Emissions
- Helps end US Dependence on Foreign Oil
- Extends Engine Life
- Increases Horse Power
|
|
|
|
|
PCV Enhancer HHO kit BOOST MPG WATER4GAS water for fuel |
This
is a new unit assembled with the highest standards in mind. Notice that
it is a metal unit with plastic bowl. This unit has the proper brass
fittings for your PCV lines; not air fittings. 2 hose clamps and 2
cable ties are included for a complete install.
|
- Help save our environment -- minimize pollution
- Help End our Dependence on Foreign Oil
- Save Money on Gasoline
- Built to meet or exceed specifications in Water4Gas Manual
- Ready to Install
|
|
|
|
|
HHO KIT Safety Spark Arrestor WATER4GAS water for fuel
This
Solid Brass, High Quality Spark Arrestor is needed for your HHO
Hydrogen generator kit assembled using WATER4GAS specifications. Don't
trust your kit and your vehicle with anything less than the best.
|
- Solid Brass
- Save on Gasoline
- Highly Recommended Safety Device for HHO Kit
- Built to meet or exceed Water4Gas Specifications
- water car
|
|
|
|
|
Hydrogen on Demand O2 Sensor Extender
O2 Extender is 18 mm to fit most applications. This
will trick the O2 sensor on most vehicles 1996 and older without electronics involved
|
- Saves Money on Gas
- Lowers Emissions
- Helps end US Dependance on Foreign Oil
- Extends Engine Life
- Increases Horse Power
|
|
|
|
|
HHO Safety Bubbler vaporizer WATER4GAS
Hydrogen on Demand
This is a bubbler / vaporizer for your HHO system, this item is
built to specs using the WATER4GAS manual. The unit has a valve for
adjustment of the air flow and 24" of hose for your connection. |
- Built to meet or exceed Water4Gas specifications
- Save Money on Gasoline
- Help End our Dependance on Foriegn Oil
- Minimize Pollution -- Help save our Environment
- Ready to Install
|
|
|
|
|
Fuel Heater for HHO Water4Gas System
This
item is built of solid brass fittings to the details listed in the
WATER4GAS manual. This item is recommended for use with any Hydrogen on Demand system,
or it can increase MPG's as a stand-alone device.
|
- Solid Brass
- Save Money on Gasoline
- Minimize Pollution and Save our Environment
- Help End our Dependance on Foreign Oil
- Built to meet or exceed Water4Gas Standards
|
|
|
|
|
